1X2 & 1X3 Prestressed Steel Strand

2 wire and 3 wire prestressed concrete steel strand consist of two wires or three wires of the same nominal diameter, spun together in helical form over a theoretical common axis.

It is uncoated steel strand, general for use in pre-tensioned and post-tensioned prestressed concrete construction.

1X2

Inquire Now

ADVANTAGES

-Primary advantages

High Tensile Strength, full specifications from 2x2.25 to 3x6.00.

Qualified Quality, precision single wire diameter control.

Strand Lay Length could be as per customer's requirement.

Package can be as per clients' requirement.

-Why should I buy this 1x2 and 1x3 prestressed steel strand ?

Package dimension can be as per clients' requirement.

Within the range of standard, mainly the requirement of weight per meter and lay length, we can manufacture as per clients' specific strand lay length, which can make the stand have a longer length per meter.

-What makes this product different to other factory's 1x3 prestressed steel strand?

Single wire diameter is controlled more precisely than other factory.

USE

-Where can our 1x3 and 1x2 prestressed steel strand be used?

Our products can be used in manufacturing T/I beam, Slab, pile, poles, sleepers......

SPECIFICATIONS

Specifications (IRAM-IAS U 500-07:2005) :

Mechanical properties, measurement and mass of the cordons with thermal treatment

Designation of the cordon	Construction of the cordon	Nominal diameter of the wire	Nominal area of the cross section(metal section)	Weight per unit of length		Load to 1% of total elongation,minimum Q1	Roture minimum charge Qt	Minimum yield limit Re	Resistance to traction, minimal R	Percentage elongation of rupture under load in 200mm, minimum At
Designation of the cordon	Construction of the cordon	mm	mm²	kg/m	Discrepancy	kN	kN	Mpa	Mpa	%
C 1950	2 x 2.25	2.25	7.95	0.0624	±8%	13.20	15.60	1660	1962	2.5
C 1950	3 x 2.25	2.25	11.93	0.0936	±8%	19.80	23.50	1660	1970	2.5
l The designation values correspond approximately to the nominal tensile strength of the cordon, expressed in megapascal (Mpa). l There are theoretical calculation values given for guidance. l The values of the nominal mass per unit of length are calculated considering that the density of the steel is 7.85kg/dm³and with a value of π=3.1416. NOTE - The load at 1% of the total elongation is considered equal to 0.2% permanent deformation.

Mechanical properties, measurement and mass of the cordons with thermal mechanical treatment(BR - low relaxation)

Designation of the cordon	Construction of the cordon	Nominal diameter of the wire	Nominal area of the cross section(metal section)	Weight per unit of length		Load to 1% of total elongation,minimum Q1	Roture minimum charge Qt	Minimum yield limit Re	Resistance to traction, minimal R	Percentage elongation of rupture under load in 200mm, minimum At
Designation of the cordon	Construction of the cordon	mm	mm²	kg/m	Discrepancy	kN	kN	Mpa	Mpa	%
C 1950	2 x 2.25	2.25	7.95	0.0624	±8%	14.04	15.60	1766	1962	2.5
C 1950	3 x 2.25	2.25	11.93	0.0936	±8%	21.15	23.50	1773	1970	2.5
l The designation values correspond approximately to the nominal tensile strength of the cordon, expressed in megapascal (Mpa) l There are theoretical calculation values given for guidance. l The values of the nominal mass per unit of length are calculated considering that the density of the steel is 7.85kg/dm³and with a value of π=3.1416. NOTE - The load at 1% of the total elongation is considered equal to 0.2% permanent deformation.

PACKAGE

Tubotech & Wire Brasil 2025

YUANXIAN HIGH-TECH MATERIAL TRADING (Tianjin) Co., ltd

Date：October 29th - 31st, 2025

Booth No. ：901A

Exhibition Hall：Sao Paulo Exhibition Center, Brazil

Address：Rodovia dos Imigrantes, KM 1.5 – Água Funda, São Paulo – SP, 04329-100

Web: www.yxmaterial.com

Tel: +86 13820020923 +86 18020061362

Email: info@yxmaterial.com

Welcome to visit our booth !

TAGS: 1X2 & 1X3 PC Strand, prestressed steel strand